Menu 1. Set Up Clock; Menu 2. Programme Setting; Sub-Menu 02.01. Set Up Chrono; Sub-Menu 02.02. Daily Programme - Bronpi Karina Instructions D'utilisation

Level 1
04 - Buzzer mode
05 - Maximum time of
charge
06 - Boiler State
07 - Counter memory
08 - Delete total hours
5.2.2.

MENU 1. SET UP CLOCK

See Boilers User's Manual.
5.2.3.

MENU 2. PROGRAMME SETTING

See Boilers User's Manual.
5.2.3.1.

SUB-MENU 02.01. SET UP CHRONO

See Boilers User's Manual.
The operation of the geared engine of the tank, in all of the programmes described, depends on the fact that the hopper of the
boiler is not filled up over the maximum level sensor. In that case any filling order will be cancelled.
5.2.3.2.

SUB-MENU 02.02. DAILY PROGRAMME

In the case that we want to make a daily programme we must start from the following screen:
By pressing once button 3 we access to the daily programming submenu and, by default, the following screen will be shown:
We need to change the option "OFF" by "ON" by pressing the buttons nº1 and nº2 to confirm the machine that the programme has been
chosen:
We must now choose the schedules that we want the boiler to be switched on. To do this, there are four different starting hours: START 1,
START 2, START 3 and START 4. We do not have a direct menu where we can set a stop schedule, such as chapter 7.3.5.2. of the boiler
user's manual, but the moment of stop will be done for a period of time previously established (see chapter 10.5. Maximum time of charge) or
when the fuel reaches the maximum level of the hopper.
For example:
Starting from the previous screen, we press button 6 and it will be shown:
OPERATING INSTRUCTIONS
Level 2
05 - Portuguese
06 - Spanish
Provides information on the status of the tank.
Provides information on the performance hours.
Exclusive access to a skill-labour technician.
M - 2 - 2
PROGRAMME
DAY
OFF
M - 2 - 2 - 01
PROGRAMME
DAILY
ON
M - 2 - 2 - 01
PROGRAMME
DAILY
18
Level 3 Level 4
1000 L AUXILIARY TANK
Value
Set
Set
ON/OFF
Set