Before First Use; Assembling And Using The Food Processor; Chopper - Rotel U4362CH Mode D'emploi

 BEFORE FIRST USE
o Remove all packaging materials and any stickers from the appliance.
o Check that all listed parts are included. If anything is missing, please contact the after-sales
service.
o Wipe off all removable parts with a damp cloth. Never use abrasive products. DO NOT
IMMERSE THE MOTOR BASE IN WATER. The blades are very shard, handle with care.
o Place the device on a flat stable surface and ensure a minimum of 10 cm clearance around
the device.
o Fully unwind the power cord and check for any signs of damage.
 ASSEMBLING AND USING THE FOOD PROCESSOR
Due to a safety locking system, the food processor will not work until the components are
locked in place correctly.
To disassembly, simply reverse the steps outlined in the assembly instructions, with the power
cord unplugged from its wall socket.
You can increase or decrease the speed in two steps by adjusting the selecting knob on
Speed 1 or Speed 2. The pulse function (P) gives more control over the desired texture of the
processed food.

Chopper

o Place the drive shaft into the center of the motor base. Ensure it is properly installed.
o Mount the processing bowl onto the shaft by turning its handle clockwise until it fits.
o Clip the chopper on the blade adaptor.
o Set the blade adaptor in the bowl over the drive shaft.
o Put the lid on the bowl, turn the lid clockwise until it locks into place.
o Pour liquid and/or give solid ingredients in the bowl through the feed tube. Use the pusher
to guide solid ingredients through the feed tube.
Processed food
Chocolate
Cheese
Meat
Spice & herbs
Fruit, vegetable, nuts
Onion
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Capacity per batch
≤ 100 g
≤ 200 g
≤ 500 g
50~100 g
100~300 g
≤ 500 g
38