User Manual - Marmitek MegaView50 Guide Utilisateur

2. CONTENT OF THE PACKING
MegaView50
1x transmitter (Audio/Video Transmitter) 1x transmitter (Audio/Video Transmitter)
1x receiver (Audio/Video Receiver)
1x User manual
3. CAT5E CABLE REQUIREMENTS
• UTP-, FTP- or STP-cable
• 24AWG or lower
• Solid twisted pair
• 100 ohm at 1MHz
• RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5 cable, CAT6 cable may also be applied (this offers better quality).
4. INSTALLATION
DVD PLAYER
OUT
AUDIO VIDEO
R L
4
IR Extender cable
AUDIO( R / L )
VIDEO
1
In order to check the correct operation of the system, it is recommended to check the
planned set-up first. For this purpose, please connect everything as indicated below
but do not yet stick the components or fasten the screws.
1. Switch off all A/V devices before you start connecting.
2. C onnect the A/V device (for instance the settop box or Media Center PC) to the
Audio and Video IN of the MegaView50/51 transmitter (Audio/Video Transmitter)
[1] using a cinch cable (not included).

3
up to 300m with Cat 5e cable
Transmitter
MegaView51
1x receiver (Audio/Video Receiver)
1x Infrared receiver
1x Infrared extender cable with 2 IR LEDs
1x Power adapter
1x User manual
POWER IN
6
12VDC
Receiver
DISPLAY
IR Receiver
INPUT
VIDEO AUDIO
L R
IR WINDOW
2
VIDEO
IR Receiver
V+
AUDIO ( R / L )
GND
IR OUT
IR Receiver
5
© MaRMiTeK