Festo SDE5 Série Notice D'utilisation page 25

SDE5-...
5 Fitting
Fitting the mechanical components
If you are using several wall supports:
Push the dove-tail of the wall support into
S
the connecting groove (A) of the next wall
support.
Fasten the first and last wall support each
S
with two screws (diameter 4 mm) into the
intended position.
If you are using more than three wall sup-
ports, every second support must also be
fastened with two screws.
Press the SDE5-... into the wall support. If
S
fitted correctly, all four spring clips 4 will
be heard to snap into position.
With individual fitting:
Break out the straps (A) to facilitate the
view of the all-round LED.
Festo SDE-... 0204NH English
(A)
Fig. 6
Fig. 7
Fig. 8
4
(A)
25