Mechanical Assembly - Pilz PSEN op2H Manuel D'utilisation

PSEN op2H Series Instruction Manual

3. MECHANICAL ASSEMBLY

The transmitter (TX) and receiver (RX) must be assembled so that the
respective optical surfaces are arranged parallel to each other and the
connectors are positioned on the same side. The distance between the
transmitter and receiver must be within the operating range of the
model you are using (see type label or Ch.9, "Technical details").
Align the devices precisely, following the guidelines given in Ch. 5,
"Alignment".
Use the supplied angle bracket to attach the device, as shown in Fig.
12.
16