Cleaning The Sensors; Changing The Batteries In The Remote Control; Replacing The Rechargeable Battery; Storage - Miele HS17 Mode D'emploi

Cleaning the sensors

^ Carefully clean the sensors on the
side and the bottom of the robot
vacuum cleaner using a dry cotton
wool bud.
Changing the batteries in the remote
control
The remote control requires two 1.5 V
(AAA) batteries.
^ Remove the battery compartment
cover.
^ Replace the batteries making sure
the polarity is correct.

Replacing the rechargeable battery

Replace it with an original Miele
lithium-ion rechargeable battery for
your Scout RX1.
^ Place the robot vacuum cleaner
upside down on a level, clean
surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
^ Unscrew the cover of the
rechargeable battery compartment
on both sides with a cross-headed
screwdriver.
^ Carefully remove the rechargeable
battery, pressing the lug on the
contact to release it.
^ Insert the new rechargeable battery.
^ Replace the cover of the
rechargeable battery compartment.
^ Dispose of the old rechargeable
battery in a designated collection/
recycling bin for batteries.

Storage

,
Before storing the robot vacuum
cleaner, switch it off with the OFF
switch on the side.
If the robot vacuum cleaner is not going
to be used for a long period of time,
make sure it is stored in a well
ventilated, cool place.
en
49