Bosch Lifestyle MUZ5VL1 Notice D'utilisation page 7

Operation
Risk of injury
Do not grip the sharp blades or edges
of the cutting discs. Take hold of cutting
discs by the edge only.
Before attaching/removing the continuous-
feed shredder, wait until the drive has
come to a standstill and pull out the mains
plug.
Keep fingers clear of the filling shaft,
add more ingredients with the pusher.
Warning!
The continuous-feed shredder must
be completely assembled before use.
Never assemble the continuous-feed
shredder on the base unit.
Operate the continuous-feed shredder
in the indicated operating position only.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-setting rotary
switch you can find the values in brackets
after the values for a 7-setting rotary
switch.
Reversible slicing disc – thick/thin
for slicing fruit and vegetables.
Process at setting 5 (3).
Designation on the reversible slicing disc:
"1" for the thick slicing side
"3" for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or chocolate.
Slice boiled, waxy potatoes only when they
are cold.
Reversible shredding disc –
coarse/fine
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Processing at setting 3 (2) or 4 (3).
Designation on the reversible shredding disc:
"2" for the coarse shredding side
"4" for the fine shredding side
Robert Bosch Hausgeräte GmbH
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only at setting 7 (4).
Grating disc – medium-fine
for grating raw potatoes, hard cheese
(e.g. Parmesan), cooled chocolate and nuts.
Process at setting 7 (4).
Warning!
The grating disc is not suitable for grating
soft cheese and cheese slices.
Potato fritter disc
For grating raw potatoes for rostis
and potato fritters, for cutting fruit and
vegetables into thick slices.
Process at setting 7 (4).
Asian vegetable disc
Slices fruit and vegetables into fine
strips for Asian vegetable dishes.
Process at setting 7 (4).
Warning!
The inserted blades must be face up.
Working with the continuous-feed shredder
Fig. 
Press the Release button and move

the swivel arm to position 2.
Insert the bowl:

– Tilt the bowl forwards and then
set it down.
– Turn anti-clockwise until it locks
into place.
Press the Release button and move

the swivel arm to position 3.
Remove drive cover from the drive of

the continuous-feed shredder (Fig. -5a).
Hold disc holder at the lower end, ensuring

that the two tips are face up.
Carefully place the required slicing

or shredding disc onto the tips of the disc
holder (Fig. -6a). In the case of reversible
discs, ensure that the required side is face
up.
Grip disc holder at the upper end and insert

into the housing (Fig. -6b).
Attach the cover (note mark) and turn

all the way in a clockwise direction.
Place continuous-feed shredder on the

drive and rotate all the way in a clockwise
direction, as illustrated in Fig. -8.
Turn rotary switch to recommended

setting.
en
7