Makita FN001G Manuel D'instruction page 11

Replacing driver guide
Optional accessory
Replace the standard-equipped driver guide with the
optional driver guide better suited for fastening soft
wood.
1.
Remove the hex bolts on the driver guide using
the hex wrench.
1
► 1. Hex bolt
2. Pull off the standard-equipped driver guide
downward.
► 1. Standard-equipped driver guide
1
11 ENGLISH
3. Install the optional driver guide by pushing it
upward into the guide slot.
2
► 1. Optional driver guide 2. Guide slot
4. Secure the optional driver guide with the hex bolts.
1
► 1. Hex bolt
1