Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you
complete regular service.
Tighten All Screws & Nuts
Check Drive Belts
Lubricate Chute Control Flange
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does not
cover items that have been subjected to op-
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain the snow thrower as instructed in
this manual.
Some adjustments will need to be made pe-
riodically to properly maintain your snow
thrower.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
AFTER FIRST USE
.
Check for any loose or damaged parts
after each use.
LUBRICATION CHART
F–011013M
MAINTENANCE
After
First
Before
12
Each
Hours
Needed
Use
√
.
Tighten any loose fasteners.
AFTER EACH USE
.
Run the machine to clear the auger of
snow.
.
Remove all snow and slush from the
snow thrower to prevent freezing of au-
ger or controls.
LUBRICATION – AS REQUIRED
.
Lubricate the flange on the discharge
chute before storage.
.
See Lubrication Chart diagram for lu-
brication points and type of lubricant.
14
Begin
As
Before
Each
Storage
Season
√
√
√
Lubricate chute control flange.
Remove discharge chute and
coat flange with a clinging type
grease such as Lubriplate.
SERVICE
DATES
Figure 9
Publicité
Table des Matières
