Warnings And Other Notices On The Device - Laserworld Ecoline Série Mode D'emploi

-
Do not face spotlights (especially
moving heads) to the device.
-
Check temperature after approx.
30 minutes with each new ins-
tallation. If necessary install the
projector at a place with different
temperature.
-
Switch off device when it is not
needed. Diodes are switched on
and can wear out even if there is
no visible laser output.
-
Keep the device dry. Protect it
from moisture, rain and damp.
• The devices of Ecoline, Club and
Proline Series are not meant for
professional applications. After
approx. one hour of operation, the

6. Warnings and other notices on the device

Laser radiation!
Avoid exposure
to beam
Laser class 2
Caution of ra-
diation if cover
is removed
•
•
Use in enclosed spaces only!
device should cool down for about
15 minutes.
Please ensure the fans and
heatsinks are clear from dust and
debris otherwise the risk of over-
heating may occur. If the unit and
airways appear to be blocked then
please contact a qualified service
engineer to maintain and service
the product.
Removal of the warranty label
as well as damages to the device
caused by improper handling,
neglect of the safety instruc-
tions and service notes will void
the warranty.
Model type
Production year
Wavelength
Output power
Power consumption