TFA 60.2533 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
TFA_No. 60.2533_Anleitun_02_16
Radio-controlled alarm clock with thermometer
• The clock will scan the DCF frequency signal and the DCF symbol
flashes on the LCD. When the signal is received successfully after
3-5 minutes, the radio controlled time and the DCF symbol
appear permanently. The clock automatically scans the time sig-
nal every hour to maintain accurate timing.
• In Daylight Saving Time "S" is shown on the LCD.
• If the reception fails, activate the reception manually by hold-
ing "°C/°F" button for 3 seconds.
• The °C/°F display shows the signal receiving status:
Normal reception status
Weak signal
• In case the clock cannot detect the DCF-signal (for example due
to disturbances, transmitting distance, etc.), the time can be set
manually. The clock will then work as a normal quartz clock.
(see Manual setting of clock and calendar).
6. How to operate
6.1 Manual setting of clock and calendar
• Hold "MODE" button for 3 seconds in normal mode (time/tem-
perature display). The hour digit is flashing. Press "▼" or "▲"
buttons to adjust hours. Holding "▼" or "▲" buttons, you will
enter fast mode.
20
28.01.2016
14:55 Uhr
Seite 11
Radio-controlled alarm clock with thermometer
• The setting sequence is shown as follow: Hours, Minutes, Year,
Month and Day. Press "▼" or "▲" button to make the desired
settings.
• The instrument will quit the setting mode, if there is no but-
ton used within 30 seconds.
• The manually set time will be overwritten by the DCF time
when the signal is received successfully.
• Press "▲" button to choose 12 HR or 24 HR system.
6.2 Day-of-week language
• Press and hold "▼" button. Language abbreviations change
from one language to another: English (EN), German (GE), Ital-
ian (IT), French (FR), Spanish (SP), Dutch (DU), Swedish (SW).
• Release the button when you have selected your desired lan-
guage.
6.3 °C/°F
• If necessary select temperature display by "MODE" button.
• Press "°C/°F" button to toggle between °C or °F as tempera-
ture unit.
6.4 Setting of time zone
• The time zone is used for the countries where the DCF signal can
be received but the time zone is different from the DCF time.
21

Publicité

Table des Matières
loading

Table des Matières