2/ Preparing Your Appliance; Description Of The Kettle; Before Using Your Kettle; 3/ Using Your Appliance - Brandt BO-800 Manuel D'instruction

2/ PREPARING YOUR APPLIANCE

A. Description of the kettle
B. Before using your kettle
For the first time to use or no use for a long time, it is recommended that you fill to the maximum
level mark with fresh tap water, boil and empty the kettle at least 2 times to clear kettle of any tiny
particles. Do not drink such water.

3/ USING YOUR APPLIANCE

1. Press the lid opening button on the handle.
2. Remove the kettle from the base to the filling place. Fill the kettle with desired amount (no
less than the minimum amount 0.5L and no more than the maximum.
3. Place the kettle back on the power base.
4. Connect the plug into a power outlet (220-240V, AC), switch the kettle on by pressing the
switch on "1". The light will illuminate to indicate the kettle is heating. The kettle will
automatically switch off once the water has boiled and the light goes off.
5. Lift the kettle from the base, and you can pour out the water into a container.
1. Lid
2. Spout
3. Lid opening button
4. Handle
5. Switch
6. Light indicator
7. Power base
10