Before Using The Machine - Rothenberger Industrial 1500000797 Mode D'emploi

1500000797_Anleitung_D,GB,FR,CZ,HU,IT,SI,SK:PRINT

BEFORE USING THE MACHINE

FITTING AND CHANGING THE BATTERIES
The device is battery powered and 4 1.5V R03/AAA batteries must be used. The batteries
must be fitted before the device is used for the first time. The batteries must be changed
when the device can no longer be switched on or when the battery status light is flashing.
Proceed as follows:
- Loosen the battery compartment cover
screw with a screwdriver and remove the
cover.
- Insert two new 1.5 V R03/AAA-batteries
into the battery compartment. Consult the
polarity markings
compartment. Be sure not to reverse the
polarity.
- Replace the battery compartment cover
and tighten the screw.
Remove the batteries from the device if you do not use it for a longer
period of time.
We recommend that you change all four batteries at the same time - if old and new batteries
are mixed the batteries can discharge one another. Use only batteries of the type stated.
Further instructions on the use of and care for batteries can be found in the section on
maintenance and cleaning.
in the battery
15
09.09.2014 7:43 Uhr Seite 15