1500000797_Anleitung_D,GB,FR,CZ,HU,IT,SI,SK:PRINT
TECHNICAL SPECIFICATIONS
Range
Resolution
Accuracy
Power source
Working temperature
Storage temperature
Light source
SCOPE OF USE
The digital moisture meter is designed to measure humidity in wood and building materials,
such as fire wood, plastering, concrete or screed. The prongs are pressed against the
material and a value appears on the display.
The device may not be used in modified form.
This product is designed for DIY and domestic use only and is not suitable for commercial,
industrial or or heavy duty use.
It is essential that you read the safety instructions before using the device and that you follow
these carefully. Keep this operating manual in a safe place and pass it to anyone who uses
the device.
Do not use the device other then intended. Misuse can cause damage to persons or property.
09.09.2014
6 to 44% for wood,
building material according to table
temperature 0 to 40 °C (32°F to 104°F)
1% for wood,
0.05% of displayed value for building materials,
1°C or 2°F for temperature
for wood:
±2% up to 29%,
±4% from 30%
building materials: 0.1 of displayed value
0.2 of displayed value from 1.4
4 R03/AAA batteries 1.5V
0 to 40°C
at relative humidity < 85%
-10 to 50°C
at relative humidity < 85%
1 LED white, exempt group
according to EN 62741
14
7:43 Uhr
Seite 14