Renkforce RF-IR-Kitchen1 Notice D'emploi page 40

• "LANGUAGE"
Here, you can choose your desired menu language.
• "DIMMER"
- "POWER SAVING"
Here, you can set the display brightness for the standby mode.
- "TURN ON"
Here, you can set the display brightness for the regular mode.
• "DISPLAY"
Here, you can choose if the display is to be shown in colour or monochrome.
• "POWER MANAGEMENT"
Here, the time is set after which the internet radio switches to standby mode automatically if no input is made and/
or no network is present.
• "SLEEP TIMER"
This menu item configures the sleep timer.
If you enable it (a time must be selected), the radio will switch off automatically after the chosen time.
You can choose the following times: 15, 30, 60, 90, 120, 150 or 180 minutes.
• "BUFFER"
You can choose an interim storage buffer of 2, 4 or 8 seconds for the radio reception here.
The internet radio saves the information received briefly in order to avoid stuttering in playback.
• "WEATHER"
- "SET LOCATION"
Select the town for which you want to display weather data.
First select the desired continent, then the country and last the town.
- "TEMPERATURE UNIT"
Here, you can switch the temperature display between "CELSIUS" (°C) and "FAHRENHEIT" (°F).
- "SHOW ON STANDBY"
Here, you can select if the weather display is to be shown in standby or not.
If you enable the function, the display will switch between time and weather display in standby mode.
• "LOCAL RADIO SETUP"
Here, you can select local radio stations.
They can be recognised automatically (by the IP address) or set manually.
40