Renkforce RF-IR-Kitchen1 Notice D'emploi page 39

- "CHECK NETWORK WHEN POWER ON"
In the last item of this submenu, you can switch the automatic network check when turning the radio off and on.
If this function is activated, the menu for the network setup is displayed after activation when there is no
internet connection.
• "DATE & TIME"
- "SET DATE & TIME"
Here, you can choose if the date and time are to be set manually or automatically.
In order to enter the setting manually, select manual settings and set the data with the dial switch VOLUME (11)
and the buttons LEFT (2) and RIGHT (4).
- "SET TIME FORMAT"
Select the time format 12 hours or 24 hours here.
- "SET DATE FORMAT"
Select the desired format for the date here. You have the following options:
"DD/MM/YYYY" (day/month/year) (standard)
"YYYY/MM/DD" (year/month/day)
"MM/DD/YYYY" (month/day/year).
- "DAYLIGHT SAVING TIME (DST)"
Switch automatic summer and winter time recognition on or off here.
• "ALARM"
The settings are described in more detail in the chapter "Alarm Function".
- "ALARM 1 (TURN OFF)"
Here, you can make all settings for alarm 1.
- "ALARM 2 (TURN OFF)"
Here, you can make all settings for alarm 2.
- "NAP ALARM (TURN OFF)"
This alarm function is used to wake you up after a pre-set duration (e.g. for a nap after lunch).
- "ALARM VOLUME"
Set the alarm volume here. This applies to all functions of the device.
• "TIMER"
Here, you can set a timer that counts back to 00:00.
The Timer time is set with the buttons LEFT (2) and RIGHT (4) and confirmed by pushing the dial switch
VOLUME (11).
The timer can be stopped and started again by pushing the dial switch VOLUME (11).
A signal sounds after the end of the set time.
39