LAVAZZA A MODO MIO Minu Mode D'emploi page 14

EN
Problem encountered
Machine does not turn on.
Power light is off after having
pressed the start-up/stand-by button.
The machine requires a lot of time to
heat up.
The machine is very noisy.
Red flashing light .
The coffee flows out too fast and no
creamy froth forms on the surface.
No coffee flows out or it just drips out
slowly.
• Nominal Voltage - Power Rating - Power Supply:
See label on the appliance
• Measurements: Height
253 mm
• Weight: approx. 2.8 kg
• Water tank: 0.5 L - Removable type
TROUBLESHOOTING
Possible causes
» Machine is not connected to the power
source.
» The machine has limescale build-up.
» No water in the tank.
» Water tank fitted incorrectly or
absent.
» Coffee knob in wrong position.
» Capsule already used.
» Dispensing spout is clogged.
TECHNICAL SPECIFICATIONS
Width Depth
145 mm 290 mm
Client Service Lavazza A MODO MIO
0800 599 9200
Fax. +44 (0)1895 209 778 e-mail: info@lavazzamodomio.co.uk
Solution
» Connected the machine to the power source.
» Contact customer service.
» Descale the machine.
» Top up the tank with fresh drinking water.
» Fit the water tank correctly.
» Turn the coffee knob to the stop position.
» Contact customer servicea.
» Replace the capsule inside the capsule holder drawer
with a new one.
» Clean the coffee dispensing spout
(see MAINTENANCE AND CLEANING).
• Housing materials: Thermoplastic
• Cable Length: 0.8 m
• Thermo fuses
• Instantaneous aluminum boiler with temperature probe