Ibiza Light LAS160P-MKII Manuel D'utilisation page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
Thank you for purchasing our mini firefly laser LAS160P-MKII IBIZA LIGHT. For your own safety and better operation of this light
effect please read this manual carefully before using and operating the unit.
Packing list
Upon reception please check carefully the contents of the carton in order to make sure that the product has not been damaged
during transport. After that, check the following parts.
1.1x Laser Unit
2.1x 12Vdc power adaptor
3. 1x Stand
4. 1x User Manual.
Safety guide
Do not disassemble or repair the system by yourself. If there is a problem, please enquire or contact professional electronic
engineer, or seek help from your local dealer.
Maintenance
Maintain the machine regularly and clean the lens with absorbent cotton dipping alcohol. Do not use a wet cloth or other chemic
solvents. The cleaning frequency depends on the usage frequency and the surrounding conditions of the laser display system.
Suggest that the system should be cleaned every 15 days.
Warning
Safety Recommendations
Before any installation and repair, please do cut off the power supply.
For safety reasons, install the unit firmly to avoid injury and damage.
Do not cover the unit.
The product should be installed by professional technician.
Do not touch the unit with wet hands or pull the power wire forcefully.
The system should be kept dry. Please don't use the system in the condition of rain, wet or dust. For indoor use only.
Do not turn on or off the system frequently, and avoid keeping it working for a long time.
Fixed Installation prevents the system from strong shaking or striking.
Prevent objects to get into the system, or there will be malfunction.
Leave at least 1m distance between the unit and other objects.
Please don't connect the power supply or turn on the system before installation.
Before switching on power, please make sure the power wire is in good condition.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Please warm-up for 15 minutes before turning on the system. Turn off the system for 25 minutes after running
continuously for three hours. Ensure the system is able to cool down in a suitable environment and has steady output
power.
When transport the system again, please use the original package to avoid shaking.
Statement
The user should comply with the instructions and warnings above. Any damage, which is caused by incorrect operation or not
following the manual, is not covered by the warranty.

Publicité

Table des Matières
loading

Table des Matières