Instructions For Use - Blatchford 941256 Instructions D'utilisation

941256 Cutting & Drill jig for fitting VT to an Elite Blade
These instructions are for use by a suitably qualified practitioner or technician.
Use appropriate Health and Safety equipment at all times including extraction
facilities.
For an existing Elite Blade user:
If fitting the VT to an existing Elite Blade that has been fitted with the Shifting Male
Pyramid option the build height is the same (These instructions also apply to the
Female Pyramid VTF version).
Swap the top housing for the VT using the same holes. Ensure that the screws are
torque tightened correctly to 25Nm and that Loctite 243 is used on the threads.
Contents of VT Cutting and Drill Jig kit:
„ Cutting and Drill Jig Clamp Frame, screws and washers
„ Socket Screw Key 3.0
„ Socket Screw Key 5.0
„ Twist Drill 8.1mm Diameter
Cutting and Drill Jig components:
M4 x 20
Clamp
Frame

Instructions for Use

Clamp
Bridge
3
Backplate
EN
M6 x 40
M4 x 30
938314/3-0120