Maintenance; Limitations On Use - Blatchford Elite2 Mode D'emploi

4 Maintenance

Maintenance must be carried out by competent personnel.
We recommend a regular visual check at least annually. Signs of wear that may affect function
should be reported to their service provider (e.g. significant wear or excessive discoloration from
long term exposure to UV).
If this device is used for extreme activity, the maintenance level and interval should be reviewed
and if required advice and technical support sought to plan a new maintenance schedule
dependent upon the frequency and nature of the activity. This should be determined by a local
risk assessment carried out by a suitably qualified individual.
Any changes in performance of this device must be reported to the practitioner
Changes in performance may include:
• reduced energy return
• unusual noises
• excessive movement
The practitioner must also be informed of any changes in body weight and/or activity level.
Cleaning
Use a damp cloth and mild soap to clean outside surfaces, do not use aggressive cleansers.

5 Limitations on Use

Lifting Loads
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment
This device is waterproof to a maximum depth of 1 meter.
Thoroughly rinse this device with fresh water after
use in abrasive environments such as those that may
contain sand or grit, for example, to prevent wear or
damage to moving parts.
Thoroughly rinse with fresh water after use in salt or
chlorinated water.
Foot products must be adequately finished to prevent water ingress into the foot shell where
possible. If water enters the foot shell, it should be inverted and dried before further use.
Exclusively for use between -15 ˚C and 50 ˚C.
5
938445PK1/1-0121