Ventilation Requirements - AYA ACA175WA Instructions D'utilisation

-Not be installed next to radiators, cookers or other sources of heat,
-Only be installed at a location whose ambient temperature corresponds to the climate
classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is located at the left on
the inside of the appliance. The appliance must be positioned so that the plug is
accessible.
The following table shows which ambient temperature is correct for each climate
classification:
Climate classification
SN
N
ST
T
Your appliance will be heavy when loaded with food and must therefore be stood on a
strong firm floor.

Ventilation Requirements

For correct operation you should ensure that air could circulate freely around the back
and the top of the cabinet. There should be 100mm between the top of the cabinet and
any overhanging kitchen furniture. Alternatively allow 50mm between the top of the
cabinet and any overhanging kitchen furniture and a gap of 25mm on either side of the
appliance.
Ensure that the appliance does not stand on the electrical supply cable. Parts that heat up
should not be exposed. Whenever possible the back of the appliance should be close to a
wall but leaving the required distance for ventilation.
Leveling
The appliance should be level to eliminate rocking. Ensure the appliance is upright and
both adjusters are in firm contact with the floor so that the cabinet is level. Adjust the level
by screwing out the appropriate level adjuster at the front, (use your fingers or a suitable
spanner). This appliance is heavy. Care should be taken when moving it.
Ambient temperatures
10 to 32℃
16 to 32℃
16 to 38℃
16 to 43℃
18