IKA RV 3 eco Mode D'emploi page 21

• Insert the condensate flask (not included in deliv-
ery) and attach the hose connectors to it
• Adjust the angle of the drive
Glassware
Please
NOTICE
instructions of the glassware for
the safe handling of laboratory
glassware!
• Locking device
1
1
read the operating
3
2
- Remove the clamping device for the angle setting of
the rotary drive by rotating the angle adjustable knob
anticlockwise according to the indication mark (1).
- Set the desired angle for the rotary drive.
- Then, secure the rotary drive against rotation by
tightening the angle adjustable knob clockwise.
- There is a locking knob (1) for locking or unlocking the
locking device (3).
- If a red mark (2) is shown, the locking device is unlocked,
otherwise it is locked.
- To lock or unlock the locking device (3), push the locking
knob (1) to the end position.
• Feed the vapour tube
2
1
21