TFA 35.1110 Mode D'emploi page 16

TFA_No_35.1110_Anl_D_GB_F_06_16
CRYSTAL CUBE – Wireless weather station
• You can make now the settings in the following sequence: hours, min-
utes, year, D/M or M/D, month, day, language of the weekday (E flashes
on the display) and DCF 77 time reception ON/OFF (ON/OFF) and adjust
them with the ▲ or ▼ button. Confirm each setting with button B 1.
• In D/M or M/D sequence the two different date displays can be selected:
month/day (American version) or day/month (European version).
• Day-of-week language: English (E), German (G), French (F), Spanish (S),
Italian (I).
• In areas where no DCF 77 time reception is possible you can deactivate
the DCF time reception (position OFF). The clock will then work as a nor-
mal quartz clock (default: ON).
• If the DCF reception is on, the manually set time will be overwritten by the
DCF time when the signal is received successfully.
7.2 Display of clock, calendar and alarm time
• Each press on the B 1 will change the display between:
→ Clock with hour, minutes and seconds
→ Clock with hour, minutes and day of week
→ Date with day, month and year
→ Alarm time 1
→ Alarm time 2
7.3 Setting of the alarm time
• Press button B 1 in clock mode three times until the alarm time 1
appears on the display.
• The alarm symbol 1 is flashing.
• Press and hold the button B 1 for 2 seconds to enter the alarm time set-
ting.
30
06.06.2016 14:25 Uhr Seite 16
CRYSTAL CUBE – Wireless weather station
• The hour digits are flashing.
• Press ▲ or ▼ button to adjust hours.
• Confirm with button B 1.
• The minute digits are flashing.
• Set minutes in the same way.
• Confirm with button B 1.
• The alarm is activated.
• Press ▼ button in the alarm mode to deactivate (the alarm symbol dis-
appears) or activate the alarm.
• Press the button B 1 again.
• The alarm symbol for the second alarm time is flashing.
• Set the second alarm time in the same way.
• After 10 seconds, the display automatically reverts to the clock mode.
• During the alarm signal will sound the corresponding alarm symbol is
flashing.
• Press any button to stop the alarm.
• You can activate the snooze function by pressing the top of the instru-
ment.
• Once the snooze function is activated the alarm sound will be interrupt-
ed for 5 minutes.
7.4 Indication indoor temperature
• Press the button B 2 to select temperature display in °C (Celsius) or °F
(Fahrenheit) as the temperature unit.
• With the button B 6 you can obtain the indoor temperature and the out-
door temperature (channel 1-3).
31