Bluetooth Settings; Infrared; Packet Data - Nokia 5200 Guide D'utilisation

S e t t i n g s

Bluetooth settings

To define how your phone is shown to other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name.
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Always accept only Bluetooth communication from
others with whom you agree.

Infrared

You can set up the phone to send and receive data through its infrared (IR) port
to or from a IRDA compatible phone or data device.
Do not point the IR beam at anyone's eyes or allow it to interfere with other
IR devices. Infrared devices are Class 1 laser products.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate or deactivate the IR port of your phone, select Menu > Settings >
Connectivity > Infrared.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your phone
is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device,
or a connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity >
Packet data > Packet data connection and from the following options:
When needed — to set the packet data connection to established when
an application needs it. The connection will be closed when the application
is terminated.
Always online — to set the phone to automatically connect to a packet data
network when you switch the phone on.
45