Programming; User Interface - Honeywell SQN8x Manuel De L'utilisateur

Programming

User Interface

User Interface
As indicated by the green LED for each port, each of the ports (up to 8)
is analyzed following a specific time interval based on the type of probe
used and the length and course of the sensor tubing. When the gas
concentration is channeled and measured at the transmitter, the value
is stored until the next reading.
Visual Indicators
I/O Normal operation:
Alarm Level A:
Alarm Level B:
Alarm Level C:
Failure:
Programming Keys:
Esc:
Enter:
Up /Down Arrows:
18
Programming
Green LED
First Red LED
Second Red LED
Both Red LEDs blink
Amber LED
Exit a Menu
Access the programming or acknowledge a
programming field or value
Select a programming field or value Scan the
reading at a specific sampling zone.
SQN8X User Manual
Honeywell
512226
2/08