MC Crypt MIDI-100 Notice D'emploi page 40

Connection and Control Elements
(18) JOG MODE button
• This button switches between scratch and search operation for the jog wheel.
• In scratch operation (button lit), playback can be influenced with the jog wheel as it would when scratching on
a record player.
• In search operation (button is not lit), turning the job wheel will influence playback speed at playback. This way,
you can find or move to a position in the track.
(19) SYNC button
• Press this button to synchronise the beat (BPM value) of the respective channel with the beat of another channel.
(20) LOOP IN button
• Press this button to store the starting point of a playback loop.
(21) LOOP OUT button
• Press this button to store the ending point of a playback loop.
• The stored track section is now automatically repeated.
• Press this button again to leave the playback loop and normally continue playback.
(22) RELOOP button
• Press this button to play the stored playback loop again.
(23) PITCH control
• Use this control to set the playback speed of the respective channel.
• Push the control upwards to decrease playback speed or down to increase it.
• At the centre position, the control has no influence on speed.
(24) PITCH BEND buttons
• These buttons allow you to temporarily influence the playback speed.
• The PITCH BEND + button increases playback speed, the PITCH BEND - button decreases it.
• When you let go of the respective button again, playback speed returns to its original value.
40