Part Names And Functions - Denon CDR-W1500 Mode D'emploi

ENGLISH
7

PART NAMES AND FUNCTIONS

Front Panel
q
Power button
• Turns the CD recorder ON and OFF.
w
Phones jack (PHONES)
• Jack for headphones.
e
Phones level control (PHONES LEVEL)
• Adjust the headphone volume.
r
Remote control sensor (REMOTE SENSOR)
• Receives signals from the remote control.
t
Disc tray (CD)
• Store-bought CDs and finalized CD-R/RW discs can be
played.
y
Display select button (DISPLAY SELECT)
• The display switches each time the button is pressed.
Time display
for both the CD only CD-R only
1 1 1
CD and CD-R
u
Title/Character button (TITLE/CHARACTER)
• When pressed while the display mode is set to CD or
CD-R, the text information is displayed.
• When text is being input, the characters change.
i
Input button (INPUT)
• Selects input source.
• Switching will be as follows each time the button is
pressed.
OPT COAX
CD
1 1 1
(OPTICAL) (COAXIAL)
Switching is not permitted during recording.
o
CD unit operating buttons
: Use this to start playback.
1
: Use this to stop playback.
2
: Use this to pause playback.
3
, : Use this to move to the beginning of
8 9
tracks.
: Use this to open and close the disc holder.
5
TIME : Use this to switch between the elapsed
time, remaining track time and total
remaining time.
!0
Relay mode button (RELAY MODE)
• The mode switches each time the button is pressed.
Relay Mix
Normal
1 1 1 1
(RELAY) (MIX) (DUAL)
!1
Finalize button (FINALIZE)
• Press this button to finalize.
!2
Clear button (CLEAR)
• Use this to delete programmed tracks or text input
characters.
• When pressed in the menu mode, the set returns to
the previous mode.
8
!3
Menu button (MENU)
• This button is used when inputting disc and track titles
and for such editing operations as CD-RW Disc
erasing.
!4
Multi Jog dial (MULTI JOG)
• Recording level control (Recording).
• Selects settings (Menu mode).
!5
Record button ( REC)
4
• Press this button to record.
• The recording standby mode is set when the record
button ( REC) is pressed alone.
4
• Press the play button ( PLAY) while in the recording
1
standby mode to start recording.
• To stop recording or to cancel the recording standby
mode, press the stop button (
!6
Disc tray (CD-R)
!7
CD-R operating buttons
: Use this to start playback or recording.
1
: Use this to stop playback or recording.
2
: Use this to pause playback or recording.
3
, : Use this to move to the beginning of
8 9
tracks.
: Use this to open and close the disc holder.
5
If the text information input operation
has performed but not finalized, the disc
holder cannot be opened until all the test
information has been deleted. (See Page
10.)
TIME : During playback, use this to switch
ANALOG
between the elapsed time, remaining track
1
time and total remaining time. During
recording, use this to switch between the
elapsed time per track and the total
remaining recording time.
!8
Normal speed copy mode button
(DUBBING NORMAL)
• The copy dubbing mode switches each time this
button is pressed.
Disc Make CD 1-track
1 1 1
dubbing dubbing dubbing
!9
Double-speed copy mode button
(DUBBING HIGH)
• The double-speed dubbing mode switches each time
this button is pressed.
Disc Make CD 1-track
Dual
1 1 1
dubbing dubbing dubbing
@0
Display
• Information screen.
Rear Panel
@1
Analog CD/CD-R output jacks
(ANALOG OUT CD/CD-R)
• Connects to the line input of an amplifier (left and
right).
• In the dual mode, only the CD-R side sound is output.
@2
Analog input jacks (ANALOG IN CD-R)
• Connects to the line output of an amplifier (left and
right).
@3
Digital CD/CD-R output jack
(DIGITAL OUT CD/CD-R COAXIAL)
• Connects to the digital coaxial input of e.g. amplifier or
recording device.
• In the dual mode, only the CD-R side digital data is
output.
@4
Digital CD/CD-R output jack
STOP).
2
(DIGITAL OUT CD/CD-R OPTICAL)
• Connects to the digital coaxial input of e.g. amplifier or
recording device.
• In the dual mode, only the CD-R side digital data is
output.
@5
Digital input jack
(DIGITAL IN COAXIAL)
• Connects to the digital coaxial output of an external
digital sources.
@6
Digital input jack
(DIGITAL IN OPTICAL)
• Connects to the digital optical output of an external
digital source.
@7
Analog CD-only output jacks
(ANALOG OUT CD)
• In all modes, only the CD side sound is output.
@8
Digital CD-only output jack
(DIGITAL OUT COAXIAL)
• In all modes, only the CD side digital data is output.
@9
Digital CD-only output jack
(DIGITAL OUT OPTICAL)
• In all modes, only the CD side digital data is output.
Scan record
1
dubbing
Display indications
q
Mode display (CD-R)
• CD:
CD (a pre-recorded CD or finalized CD-R or CD-RW
disc) is loaded.
Scan record
• CD-R:
1
dubbing
An unfinalized CD-R disc is loaded.
• CD-RW:
An unfinalized CD-RW disc is loaded.
• :
4
Lights during recording.
• :
1
Lights during play/recording.
• :
3
Pause function active.
• PROG:
Lights in program mode.
• 1 Tr, SYNC:
Synchronized recording active.
• RAND:
Plays tracks in random order.
• A.T.M.:
Auto track mark indicator.
• D.in:
This indicator lights when one of the digital inputs
(digital) is selected.
If this flashes after performing the recording operation,
check the connections of the digital input jacks.
• FADE:
This flashes during the fade-in and fade-out recording
operation.
• :
This lights when the CD-R unit's time is displayed.
• SKIP:
This lights when a track is set to be skipped.
• ON:
This lights when the skip play mode is turned on.
w
Mode display (CD)
• CD:
This lights when a disc is loaded.
• RAND:
Random indicator.
• PROG:
Program indicator.
• :
3
Pause indicator.
• :
1
Play indicator.
• :
This lights when the CD unit's time is displayed.
• HDCD:
This lights when playing discs recorded in HDCD
format.
e
Shared mode displays
• REPEAT, 1:
Lights up when a track/complete disc (or program) is
repeated.
Off when both the CD and CD-R units' times are
displayed.
• REPEAT A-B:
This lights when in the A-B repeat play mode.
Off when both the CD and CD-R units' times are
displayed.
• SINGLE, TOTAL:
Time mode indicator.
Off when both the CD and CD-R units' times are
displayed.
• DUBB:
This lights when in the normal speed dubbing mode.
• DUBB HIGH:
This lights when in the double-speed dubbing
(copying) mode.
• MIX:
This lights when in the mixed (CD and CD-R units)
mode.
• RELAY:
This lights when in the relay play mode between the
CD and CD-R units.
• DUAL:
This lights when in the CD and CD-R unit dual mode.