Cleaning
First disconnect the appliance from the power
supply (see also page 20).
Spray arms
Unscrew the castellated nut under the
upper spray arm and remove the spray arm
by pulling it straight down. Take the lower
spray arm out by pulling it straight up.
Rinse the spray arms clean under the tap.
Stainless steel filter (see Fig. 6a and 6b)
A
B
C
Remove the lower spray arm.
Turn the handle (A) to the left to remove
the filter unit.
Remove the microfilter (B) by unscrewing
the bayonet catch.
Press on the two clips (C) and remove the
filter mesh.
Clean filter mesh and filter with a brush
under running water.
Reassemble the filter mesh and filter in
reverse order.
Plastic filter (see Fig. 7a, 7b and 7c)
A
Fig. 6a
A
C
Fig. 6b
B
Fig. 7a
Fig. 7b