Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remark:
The container lid is opened automatically
during the washing cycle in order to add the
detergent to the water. If washing tablets are
used – in a holder attached to the cutlery
basket – the container should be closed.

Baskets

Halve lading
Your dishwasher offers you the option (if this
feature is included) of operating with a half
load.
Fill the upper basket and press the
1
/
-button.
2
When using this programme there must not be
any kitchenware in the lower basket.
Use of the half load programme allows you to
achieve considerable savings in water and
electricity.
Adjustment of the height of the upper basket
The top basket can be placed at two different
levels depending on the height of the dishes to
be washed.
Pull the basket completely forward, fold the
caps sideways and remove the basket.
Place the other set of wheels in the rails.
Push the basket back into the machine and
fold the caps back.
Upper basket in the high position
In this setting, the basket is suitable for
small and medium kitchenware, such as
glasses, small plates, cups, basins and
light plastic objects which are heat-
resistant.
Upper basket in the low position
In this setting, the basket is suitable for
large plates (which are not too dirty).
Loading the top basket
Stack the plates with the top side facing
forwards.
Stack cups and bowls or dishes with the
opening down.
On the left side of the basket you can place
cups and glasses on two levels by folding
the top racks upwards.
Loading the lower basket
Like the upper basket, the lower basket can
be completely pulled out by first fully
opening the door.
Place soup, flat and dessert plates, pans,
lids and saucers in the lower basket.
Fig. 5
Arrange plates with the upper side facing
the front or the middle.
Place bowls and pans with the opening
down.

Publicité

Table des Matières
loading

Table des Matières