Saving, Retrieving And Deleting Results; Cleaning And Storing The Instrument - Sanitas SBM 30 Mode D'emploi

Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two dif-
ferent WHO ranges (e.g. systolic in the high-normal range and
diastolic pressure in the normal range) the graphic WHO clas-
sification on the unit indicates the higher range (high-normal in
the example described).

6. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
• Select the desired user memory by pressing the MEM button
and then the + button. Press the MEM button again to display
the average of all saved measurements in the user memory.
Press the MEM button again to display the average day
measurement for the last 7 days. (day: 5.00 a.m. – 9.00 a.m.,
display A). Press the MEM button again to display the average
night measurement for the last 7 days (night: 5.00 p.m. – 9.00
p.m., display P). If you continue pressing the MEM button, the
latest individual results are displayed with date and time.
Systolic (in mmHg) Diastolic (in mmHg)
> = 180 > = 110
160 – 179 100 – 109
140 – 159 90 – 99
130 – 139 85 – 89
120 – 129 80 – 84
< 120 < 80
16
Measure
Seek medical advice
Seek medical advice
Have it checked regularly by doctor
Have it checked regularly by doctor
Check it yourself
Check it yourself
• To clear the memory, press the MEM button, then the display
shows no. 1. Press the "+" button to select the user memory
and confirm by pressing MEM again. Press and hold the "+"
and keys simultaneously for 5 seconds (the display will
show CLA).
• If you wish to change the user memory, see "Select memory".

7. Cleaning and storing the instrument

• Clean your device and cuff carefully only with a slightly mois-
tened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water,
otherwise liquid can enter it and cause demage.
• When storing the device, make sure that no heavy objects
are placed on top of it. Remove the batteries. The cuff tube
should not have any sharp kinks.