Sb118_60_C] And [Sb118_100_C] Presets - L-Acoustics SB118 Manuel D'utilisation

SB118 SB118
SB118 SB118
S S S S UBWOOFER UBWOOFER E E E ENCLOSURE UBWOOFER UBWOOFER
USER MANUAL USER MANUAL
USER MANUAL USER MANUAL
VERSION 2.0
7.3.3

[SB118_60_C] and [SB118_100_C] presets

The [SB118_60_C] preset features a 60 Hz low-pass filter allowing an SB118 array to be used as a cardioid subwoofer
®
companion for KUDO , dV-DOSC/dV-SUB, ARCS
The [SB118_100_C] preset features a 100 Hz low-pass filter allowing an SB118 array to be used as a cardioid
subwoofer companion for dV-DOSC, ARCS
The recommended ratios are 4 SB118 for each of the following: 6 KUDO
®
4 ARCS , 12 KIVA/4 KILO, eight 8XT, four 12XT, or four 115XT HiQ. When using the KUDO
application requiring higher SUB levels, the ratio can be 4 SB118 for 4 KUDO
Activate the LOAD PRESET menu from the LA4 or LA8 amplified controller front panel and then select the desired
preset. Refer to the ''LA4'' or ''LA8" user manual for additional instructions. The presets are also accessible using
the LA NETWORK MANAGER software (refer to ''LA NETWORK MANAGER" user manual). The following table
shows the parameters which are accessible in the ''CARDIOID'' mode:
LA4 or LA8
Inputs/Outputs
IN A
IN B
OUT 1 Reversed SB118 enclosure
OUT 2
OUT 3
OUT 4
* IN: input signal. A: channel A.
Note: The main system must be connected to additional amplified controllers. See instructions in the applicable user
manuals.
SB118_UM_ML_2.0
NCLOSURE NCLOSURE NCLOSURE
®
, and KIVA/KILO systems.
®
, and XT systems.
Table 3: ''CARDIOID'' mode accessible parameters
Elements to connect
assignments*
Input signal A
Input signal B
SB118 enclosure
SB118 enclosure
SB118 enclosure
SB: subwoofer enclosure.
w w w . l - a c o u s t i c s . c o m
®
, 6 dV-DOSC, 6 dV-DOSC/2 dV-SUB,
®
.
Accessible (O) and blocked (X) parameters
Preset
Mute Gain
IN_A X O
IN_B X O
SR_A O X
SB_A O X
SB_A O X
SB_A O X
SR: reversed subwoofer enclosure.
®
system in an
Delay Polarity
O O
O O
X X
X X
X X
X X
18 en 18 18 18