Connecting The Sb118 To The La4 Or La8 - L-Acoustics SB118 Manuel D'utilisation

7.3.2

Connecting the SB118 to the LA4 or LA8

Each of the SB118 enclosures is connected to an LA4 or LA8 output channel ranging from channel 1 through 4 where
the channel 1 is feeding the reversed enclosure. On the LA8 only, additional cabinets can be grouped in pairs in parallel
with the first ones so as to build a second basic cardioid array. Therefore a single LA4 amplified controller can drive up
to one basic cardioid array (Figure 11) and a single LA8 amplified controller can drive up to two basic cardioid arrays
(Figure 12).
!
To achieve a cardioid coverage pattern always check that the reversed SB118 is connected to the
OUT 1 output channel.
IMPORTANT
IN A
Figure 11: One basic SB118 cardioid arrays connected to an LA4
IN A
Figure 12: Two basic SB118 cardioid arrays connected in parallel to an LA8
SB118_UM_ML_2.0
OUT 4 (IN A)
OUT 3 (IN A)
OUT 2 (IN A)
OUT 1 (IN A)
OUT 4 (IN A)
OUT 3 (IN A)
OUT 2 (IN A)
OUT 1 (IN A)
w w w . l - a c o u s t i c s . c o m
EN
Note: Each
enclosure on
the right is
linked to the
enclosure on
the left using a
SP.7 cable.
17 en 17 17 17