Connecting The Sb118 To The La4 Or La8 - L-Acoustics SB118 Manuel D'utilisation

SB118 SB118
SB118 SB118
S S S S UBWOOFER UBWOOFER UBWOOFER UBWOOFER E E E ENCLOSURE
USER MANUAL USER MANUAL
USER MANUAL USER MANUAL
VERSION 2.0
LINE-UP
7.2.2

Connecting the SB118 to the LA4 or LA8

Each of the SB118 enclosures is connected to an LA4 or LA8 output channel ranging from channel 1 through 4. On the
LA8 only, additional cabinets can be grouped in pairs in parallel with the first ones. Therefore a single LA4 amplified
controller can drive up to four SB118 enclosures (Figure 7 and Figure 8), and a single LA8 amplified controller can drive
up to eight SB118 enclosures (Figure 9).
Note: The system resources are optimized for a multiple of four SB118 enclosures.
Figure 7: Four SB118 connected to an LA4 (stereo configuration)
IN A
Figure 8: Four SB118 connected to an LA4 (mono configuration)
SB118_UM_ML_2.0
NCLOSURE NCLOSURE NCLOSURE
BLOCK
LINE-DOWN
Figure 6: SB118 basic standard arrays
OUT 4 (IN B)
IN B
IN A
OUT 3 (IN B)
OUT 4 (IN A)
OUT 3 (IN A)
OUT 2 (IN A)
OUT 1 (IN A)
w w w . l - a c o u s t i c s . c o m
ON-END
OUT 2 (IN A)
OUT 1 (IN A)
Note: All output channels have
been routed to IN A by using the
INPUT MATRIX function on the
LA NETWORK MANAGER
software (see the "LA NETWORK
MANAGER – User Manual").
Alternative solution: Plug an
XLR cable from LINK A to IN B on
the rear side of the LA4 (see the
"LA4 – User Manual").
14 en 14 14 14