Beurer BC 57 Mode D'emploi page 25

• When the memory button M is
pressed again, the last individual
measurement is displayed (in this
example, measurement 03).
• When the memory button M is pressed
again, you can view your individual meas-
ured values.
• To switch the device off again, press the
Start/Stop Button
You can exit the menu at any time by
pressing the Start/Stop Button
.
.
• To clear the memory of the relevant user
memory, you must first select a user memo-
ry.
• Start the retrieval of the average measured
values. A flashes on the display and the aver-
age value of all saved measured values in
this user memory is displayed.
• Press and hold the memory button M for
5 seconds depending on the user memory
you are in.
All the values in the current user
memory are deleted.
25