Proper Wine & Beverage Center Care And Cleaning; Cleaning And Maintenance; Power Interruptions; Vacation And Moving Care - Haier HVZ040ABH5S Guide De L'utilisateur

English
ProPer wine & beverage center
care and cleaning

Cleaning and Maintenance

Warning:
Caution:
General:
Door Gaskets:

Power Interruptions

• Occasionally there may be power interruptions due to thunderstorms
or other causes. Remove the power cord from AC outlet when a
power outage occurs. When power has been restored, replug power
cord to AC outlet.

Vacation and Moving Care

• For long vacations or absences, unplug the wine & beverage center
and clean the door gaskets according to "General cleaning" section.
Leave doors open, so air can circulate inside.
• When moving always move the wine & beverage center vertically. Do
not move with the unit lying down, as possible damage to the sealed
system could occur.
Note: After moving, wait for 24 hours before plugging in the
9
To avoid electric shock always unplug your
wine & beverage center before cleaning. Ignoring
this warning may result in death or injury.
Before using cleaning products, always read and
follow manufacturer's instructions and warnings to
avoid personal injury or product damage.
• Prepare a cleaning solution of 3-4 tablespoons of
baking soda mixed with warm water. Use sponge or
soft cloth, dampened with the cleaning solution, to
wipe down your wine & beverage center.
• Rinse with clean warm water and dry with a
soft cloth.
• Do not use harsh chemicals, abrasives, ammonia,
chlorine bleach,concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may
dissolve, damage and/or discolor your wine &
beverage center.
• Clean door gaskets every three months according to
general instructions. Gaskets must be kept clean and
pliable to assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of
gaskets will keep the gasket pliable and ensure a
good seal.
wine & beverage center.