Filling The Tank - Annovi Reverberi Power Garden CAR 50 Notice D'utilisation Et D'entretien

Revision: 06
5.2

FILLING THE TANK

Before filling the tank, make sure the filters
are clean (Figure A Pos.2, Figure B Pos.16). Fill
the tank, taking care not to spill the chemi-
cals onto the ground or into ground water.
Do not use hoses or container for filling
which may enter into contact with the fluid
in the tank. Do not use hoses connected to
the drinking water supply. Fill the tank with
the amount of fluid required for the treat-
ment, making sure not to overfill it. Proceed
as follows:
1. Turn the cover (Figure A Pos.14) coun-
terclockwise and check that the breath-
er valve (Figure A Pos.15) at its centre is
not blocked.
2. Pour the chemical product in via the
filler filter (Figure B Pos.16).
3. Close the cover by turning it clockwise
(Figure C Pos.14).
16
14
Annovi Reverberi S.p.A. Via Martin Luther King, 3 - 41122 Modena - Italy
15
14
B
EN
EN
2
A
C
51