Table Of Lance Nozzle Delivery Rates - Annovi Reverberi Power Garden CAR 50 Notice D'utilisation Et D'entretien

Revision: 06
4.9

TABLE OF LANCE NOZZLE DELIVERY RATES

The fluid delivery rate of the lance depends on the pressure set with the pump regulating valve and the diameter
of the lance nozzle. The maximum nozzle delivery rate is obtained with the lance set to its narrowest jet; increas-
ing the jet diameter reduces the delivery rate. The standard nozzle is dia. 1.2 mm. Other size nozzles are available.
Use the following table to determine the nozzle diameter in relation to your treatment requirements.
NOZZLE DIA. (mm)
1
1.2
1.5
1.8
2
5
1.0
1.4
2.0
2.2
2.6
Annovi Reverberi S.p.A. Via Martin Luther King, 3 - 41122 Modena - Italy
PRESSURE (bar)
10 15
1.5 1.8
1.9 2.4
2.8 3.4
3.2 3.9
3.7 4.5
DELIVERY RATE (l/min)
EN
20 30 40
2.1 2.5 2.9
2.8 3.4 3.9
3.9 4.8 5.6
4.5 5.5 6.3
5.2 6.4 7.4
47
EN