Optional Accessories; Exploded Drawing And Spare Parts List - Mafell LNF 20 Traduction De La Notice D'emploi Originale

8

Optional accessories

- Pitch pocket cutter
When the pitch pocket cutter is used for the first time, the slot width must
first be cut out of support 8. This is done by moving the pitch pocket cutter
forward to the maximum cutting depth stop so that it will cut the necessary
slot out of the support.
- Perspex base plate
Exchanging the normal base plate against the perspex base plate enables
you to see the cutter as well as the pitch pocket to be worked on.
- Anti-slip mat wrapped, 2 pcs.
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
-20-
Order No. 091793
Order No. 076965
Order No. 095063