Lindy Quad View KVM Switch Pro 32327 Guide D'installation Rapide page 6

Quick Installation Guide English
USB and Audio Channel Switching
By default the Audio signal and the Shared USB hub on the front panel will be switched together with the PC
channel. It is possible to switch them separately as follows:
For the USB Hub you can disable the binding between PC and USB channel by pressing the hotkey combination
Scroll Lock + Scroll Lock + X. To enable it again use the combination Scroll Lock + Scroll Lock + Z.
When disabled you can switch the front USB hub alone on a different PC using the combination: Scroll Lock +
Scroll Lock + F1 or F2 or F3 or F4.
For the Audio Channel you can disable the binding switch between PC and Audio channel by pressing the hotkey
combination Scroll Lock + Scroll Lock + V. To enable it again use the combination Scroll Lock + Scroll Lock + C.
When disabled you can switch the front USB hub alone on a different PC using the combination: Scroll Lock +
Scroll Lock + F5 or F6 or F7 or F8.
Advanced Operation
It is possible to fully customize the operation of this device through the OSD menu advanced options. Please refer
to the complete manual to get a full overview of these features.
Please refer to the full manual also for the Daisy Chain connection between more switches and for the RS232
control description.
Troubleshooting
If you are experiencing any problem in getting the video signal or controlling one or more computers please refer to
the full manual that can be downloaded on our website www.lindy.com in the page dedicated to this product to fix
the problem.
If a USB device connected to the front panel USB port is not detected by one or more PC please check if this was
previously installed on them connecting it directly to USB port of the related PC.