TFA 35.1122 Mode D'emploi page 12

TFA_No. 35.1122_Anl_09_16
MODUS PLUS – Wireless weather station
7.7 Temperature indication
• Press the ▼/UNIT button to select temperature display in °C (Celsius)
or °F (Fahrenheit) as the temperature unit.
7.8 Weather trend pointer
• The trend pointer displayed on the LCD indicates if the atmospheric
pressure is increasing, decreasing or steady.
7.9 Indication of actual moon phase
• The moon phase of each day is shown on the LCD:
A B C
A: New Moon
C: First Quarter
E: Full Moon
G: Last Quarter
7.10 Backlight
• Press the SNOOZE button. The backlight turns on for 5 seconds.
7.11 Outdoor transmitter
• The outdoor transmitter will automatically transmit outdoor values to
the basic unit on channel 1 after batteries are inserted.
• After successful installation close the battery compartment of outdoor
transmitter carefully.
• Please reset the instrument and follow the battery installation proce-
dure if the outdoor transmitter does not work properly. Change the
batteries.
7.12 Additional transmitters
• After inserting the batteries into the outdoor transmitter the trans-
mitter will automatically transmit the outdoor values to the weather
station on channel 1.
• For having more than one outdoor transmitter, select a different
channel (1 to 3) for every outdoor transmitter by pressing the CH but-
ton on the transmitter while the LED is flashing (after starting up of
the transmitter). Press once for channel 2 and twice for channel 3. The
LED is flashing once for channel 1, twice for channel 2 and three times
for channel 3.
22
04.10.2016 15:24 Uhr Seite 12
D E F G
B: Waxing Crescent
D: Waxing Gibbous
F: Waning Gibbous
H: Waning Crescent
MODUS PLUS – Wireless weather station
• Press and hold the ▲/CH button on the basic unit for two seconds to
start initialization manually. The channel number on the display
appears. The reception symbol and -.-- flash. The reception of the new
outdoor transmitter will be received automatically.
• If you have installed more than one outdoor transmitter, press the
▲/CH button to change between the outdoor transmitters.
• You can also choose an alternating channel display. Press the ▲/CH but-
ton three times until the circle symbol
nel.
• To deactivate the function press the ▲/CH button again and the sym-
bol disappears.
7.13 Positioning and fixing of basic unit and outdoor transmitter
• With the foldable leg at the back of the unit, the basic station can be
placed onto any flat surface or wall mounted at the respective location
by the hanging hole at the back of the unit. Avoid the vicinity of any
H
interfering field like computer monitors or TV sets and solid metal
objects.
• Choose a shady and dry position for the transmitter. (Direct sunshine
falsifies the measurement and continuous humidity strains the elec-
tronic components needlessly).
• Check the transmission of the signal from the outdoor transmitter to
the basic unit (transmission range 75 m free field). Within ferro-con-
crete rooms (basements, superstructures), the received signal is natural-
ly weakened.
• If necessary choose another position for the outdoor transmitter
and/or basic unit.
• If the transmission is successfully, fix the outdoor transmitter by using
a nail (not included) on the wall or place it onto a flat surface.
8. Care and maintenance
• Clean the instruments with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the products for a long period
of time.
• Keep the instruments in a dry place.
8.1 Battery replacement
• Replace the batteries when the battery symbol of the basic station
appears next to the time display.
• When the batteries of the transmitter are used up, the low battery
icon appears next to the outdoor temperature display.
• Make sure the polarities are correct. Close the covers again.
• Please note: When the batteries are changed, the contact between
transmitter and receiver must be restored – so always insert new bat-
teries into both units or start a manual transmitter search.
appears for alternating chan-
23