Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch AdvancedLevel 360 Notice Originale

22 | English
ventional camera tripod. Tighten the measuring tool using the locking screw of the tri-
pod.
Roughly align the tripod before switching on the measuring tool.
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the light of the laser appear brighter
to the eye.
Do not use the laser goggles as protective goggles. The laser goggles make the
u
laser beam easier to see; they do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while driving. The laser goggles do
u
not provide full UV protection and impair your ability to see colours.
Example applications (see figures E–H)
Examples of possible applications for the measuring tool can be found on the graphics
pages.
Always place the measuring tool close to the surface or edge that needs to be checked,
and allow it to level in before the beginning of any measurement.
Always measure the distances between the laser beam and a surface or edge at two
points that are as far from each other as possible.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
The areas around the outlet aperture of the laser in particular should be cleaned on a reg-
ular basis. Make sure to check for lint when doing this.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
1 609 92A 541 | (11.11.2019) Bosch Power Tools