Medisana MSO Mode D'emploi page 21

2 Useful Information
GB
2.2 Assembly
Step 1:
Place the 5 wheels into the ends of the stand.
Step 2:
Place the gas spring in the designated hole in the
stand.
Step 3:
Mount the backrest on the seat with 4 screws
M8x25mm as illustrated. Initially, tighten the
screws by hand.
Step 4:
Attach the connector to the right armrest and then
secure both the right and the left armrests with 2
screws M8x25mm respectively, as illustrated.
Tighten the screws. Place the 4 provided caps
onto the screw heads.
15