Publicité
PROGRAMMING PER RADIO-BRAND
GB - When the current-supply-cable is connected, the Led will flash red. A self-learning programme will auto-
matically effect the synchronization and selection of the related protocol. As soon as the synchronization has
been completed, the Led will flash green and continue flashing until the car-radio make is selected for program-
CAR-RADIO SELECTION
ming.
To select the radio-model installed in the car, act on the steering-wheel commands:
Clarion
press VOLUME+ tto select the radio-model; press SEEK to memorize.
Keenwood
do not press
Jvc
press Vol+ 1 time.
Alpine
press Vol.+ 2 times.
Pioneer
press Vol.+ 3 times.
Sony
press Vol.+ 5 times.
Panasonic
press Vol.+ 6 times.
Blaupunkt
press Vol.+ 8 times.
Phonocar VM020 • VM021
press Vol.+ 9 times.
Phonocar VM016
press Vol.+ 12 times.
Phonocar VM030
press Vol.+ 13 times.
press Vol.+ 14 times.
Should the selection not be correct, please check the number of blinkings indicated for the radio-model and,
if necessary, rectify by pressing VOLUME+ (to increase) or VOLUME- (to reduce).
RE-SETTING OF DEVICE: Without interrupting the power-supply to the circuit, press the PRG-key until the
When memorization has ben completed, the Led will turn green.
green Led goes off. The Led will flash red, for some seconds, and then turn green, until a different radio-
model is selected.
Led green 1 blinking
press SEEK+
Green Led blinks 2 times
press SEEK+
Green Led blinks 3 times
press SEEK+
Green Led blinks 4 times
press SEEK+
Green Led blinks 6 times
press SEEK+
Green Led blinks 7 times
press SEEK+
Green Led blinks 9 times
press SEEK+
Green Led blinks 10 times
press SEEK+
Green Led blinks 13 times
press SEEK+
Green Led blinks 14 times
press SEEK+
Green Led blinks 15 times
press SEEK+
FUNZIONI
BUTTON
FONCTIONS
TASTI
FUNCTION
FUNKTION
FUNCIONES
TOUCHES
DER TASTEN
TECLAS
Publicité
