Installation And Setting - Meister MET16-16 Traduction Du Manuel D'utilisation Original

• Unplug the tool from the power
supply or battery if a staple is
trapped in the tool. When removing
the trapped staple, the stapler may
be triggered accidentally if it is still
connected to the power.
• Be careful when removing a
trapped staple. The mechanism may
be under tension and the stapled may
suddenly shoot out when you attempt
to release it.
• N ever use the stapler to secure
electrical cables. It is not designed
for securing electrical cables and is
capable of damaging the insulation of
the cables and thus causing electrical
shock or a fire.
• Pull out plug before loading staples.
• Switch the appliance off before
inserting plug into socket.
• Ensure that the power cable is well
away from the appliance.
• Do not touch touch-sensitive switch.
• Never point appliance at people or
animals! Staples or nails fired at close
range may cause serious injury.
• Use only appropriate staples.
• Check the magazine lock before
using.
• During breaks in work push the lock
switch (1) to „O/Off".
• Wear ear protectors and protective
gloves.
MW-5459540-Bedien-1910.indd 35
• Do not use the appliance to fasten
down electric cables or leads.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
„Tested Safety" voluntary
quality mark
CE Mark (conformity to
European safety standards)
Housing is double insulated
BJ Year of construction
SN: Serial number
SN: XXXXX T he first two underlined
numbers give the month of
manufacture.
7 – Installation and setting
Inserting staples/nails
Unplug from the power source!
Press the magazine lock (6) and pull the
slider out (Figure 2). Insert the stable/
nail strips into the magazine (Figures 3
and 4). Push the slider back into place
and lock (Figure 5).
35
05.11.19 12:21