Meister MET16-16 Traduction Du Manuel D'utilisation Original page 30

GB
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating
instructions must also be included!
Contents
1 - Scope of delivery
2 - Technical Information
3 - Components
4 - Correct use
5 - General safety
instructions
6 - Safety instructions
relating specifically to
the equipment
1 - Scope of delivery
• 1 Electric Tacker
• 400 Staples
• 100 Pins
• Operating Instructions
• Guarantee
2 - Technical Information
Technical data
Power supply
Rated current
Protection class
Maximum working
processes
Magazine capacity 5 0 staples, TYP 53
Cable
Weight
Technical changes reserved.
30
MW-5459540-Bedien-1910.indd 30
Page
30
30
31
31
32
34
220-240V~/50 Hz
5 A
II
20 x/min.
length 8-16 mm,
or 50 tacks,
length 15-16 mm
350 cm
1,28 kg
7 - Installation and setting
8 - Operation
9 - Mode of operation
10 - Maintenance and
environmental
protection
11 - Service instructions
Noise emission/vibration
Noise emission
L : 77 dB(A)
pA
L : 88 dB(A)
WA
Measuring inaccuracy:
K : 3 dB
pA
K : 3 dB
WA
Hand/arm vibrations
a : 4,83 m/s 2 ,
h
Measuring inaccuracy K: 1,5 m/s
Noise/vibration information
Measured values determined in
accordance with EN 60745-1,
EN 60745-2-16.
The specified vibration emission value
was determined when sawing wood.
When used for other applications, the
vibration emission value may deviate.
The specified vibration emission value
was measured in accordance with a
Page
35
36
36
37
37
2
05.11.19 12:21