Preparation - Gardena ClassicCut Li Mode D'emploi

Hedge trimmer safety warnings:
– Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold mate rial
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
– Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
– Hold the power tool by insulated gripping
surfaces only, because the cutter blade may
contact hidden wiring or its own cord.
Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
– Keep cable away from the cutting area.
During operation the cable may be hidden in shrubs
and can be accidentally cut by the blade.
Safe operation practices for grass shears
1 Training
a) Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the operator.
24
9853-20.960.01 A6 Short.indb 24
c) Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.

2 Preparation

a) Before use, check the supply and extension cord for
signs of damage or aging. If the cord becomes dam-
aged during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the
machine if the cord is damaged or worn.
b) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
c) Never operate the machine while people, especially
children, or pets are nearby.
3 Operation
a) Keep supply and extension cords away from cutting
means.
b) Wear eye protection and stout shoes at all times while
operating the machine.
c) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial
light.
e) Never operate the machine with damaged guards or
shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are
away from the cutting means.
06.08.18 13:37