Maintenance; Scheduled Maintenance Table - Clarke Vantage 13 Manuel D'utilisation

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following chart provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be defi ned by the person in charge of the maintenance.
WARNING!
Maintenance operations must be carried out with the machine switched off and the power supply cable
disconnected from the electrical mains.
Moreover, carefully read all the instructions in the Safety paragraph.
All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorized Service
Center.
This Manual describes only the easiest and most common maintenance procedures.
NOTE
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be
consulted at any Service Center.

SCHEDULED MAINTENANCE TABLE

Procedure
Brush cleaning
Squeegee cleaning
Tank and vacuum screen cleaning
Squeegee blade check and replacement
Solution hose fi lter cleaning
Screw and nut tightening check
Vacuum system motor carbon brush check and replacement
(1) And after the fi rst 8 working hours.
(2) This maintenance procedure must be performed by Clarke authorized Service Center.
Operator's Manual - Vantage 13
Daily, after ma-
Weekly
chine use
ENGLISH
Every six
Yearly
months
(1)
(2)
15