Bosch Kiox BUI330 Notice D'utilisation D'origine page 20

Masquer les pouces Voir aussi pour Kiox BUI330:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English – 18
Code
Cause
500
Internal drive unit fault
502
Bike light fault
503
Speed sensor fault
504
Speed signal distortion detected.
510
Internal sensor fault
511
Internal drive unit fault
530
Battery fault
531
Configuration error
540
Temperature error
550
An impermissible load has been de-
tected.
580
Software version error
591
Authentication error
592
Incompatible component
593
Configuration error
595, 596
Communication error
1 270 U20 XBK | (16.04.2020)
Corrective measures
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check the light and the associated wiring. Restart the sys-
tem. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check that the spoke magnet is positioned correctly, and
adjust it if necessary. Check that nothing has been tam-
pered with (tuning). Drive assistance is reduced.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch off the eBike, remove the eBike battery and rein-
sert the eBike battery. Restart the system. If the problem
persists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
The eBike is outside of the permissible temperature range.
Switch off the eBike system and allow the drive unit to ei-
ther cool down or heat up to the permissible temperature
range. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Remove the load. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch off the eBike system. Remove the battery pack and
reinsert it. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
Use a compatible display. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check the wiring to the drive and restart the system. If the
problem persists, contact your Bosch eBike dealer.
Bosch eBike Systems

Publicité

Table des Matières
loading

Table des Matières