Connecting Wires To Terminals - Kenwood KCA-R71FM Mode D'emploi

Connecting Wires to Terminals

O-N selection switch
"N"
Antenna plug for
automobile
Car stereo
with FM tuner
2WARNING
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
2CAUTION
Be sure to press the reset button after installation.
Display unit
CD/MD auto-changer
Audio Right output
Audio Left output
Or
FM/AM
antenna input
FM/AM antenna output
Output
Changer connection wire
FM modulator unit
Control input
+
Ignition wire (Red)
+
Battery wire (Yellow)
-
Ground wire (Black) (To car chassis)
Do not install an antenna of radio equipment or distribute
the antenna wire near the changer output wire, for this
could cause malfunction with this unit.
— 13 —
CD/MD auto - changer input
Control output
Ignition key
switch
ACC
Car fuse box
Battery