Troubleshooting Guide
The messages shown below display your systems condition.
EJECT:
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
➪
Load the disc magazine properly.
NO DISC:
No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
TOC Error:
No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
The CD/MD is quite dirty. The CD is upside-down. The CD is scratched a lot.
➪
Clean the CD/MD and load it correctly.
BLANK DISC:
Nothing has been recorded on the MD.
➪
The next MD will automatically be played.
No Track:
No tracks are recorded on the MD, although it has a title.
➪
The next MD will automatically be played.
E-12:
Now reading the data in the disc.
➪
Normal playback is resumed upon completing the reading of the disc data.
E-77:
The unit is malfunctioning for some reason.
➪
Press the reset button on the display unit. If the "E-77" code does not disappear, consult your nearest service center.
Mecha Error:
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
➪
Check the disc magazine, and then press the reset button on the display unit. If the "Mecha Error" code does not
disappear, consult your nearest service center.
Hold Error:
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
➪
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
E02
E04
E77
E77
E77
E0d
— 18 —
E77
E01
E99